Quick Answer: How To Break Up Concrete Without A Jackhammer?

How do you break concrete by hand?

Instructions

1. Dig Under the Concrete. Dig out the soil, gravel, or other material from under the concrete, using a shovel and a pickax.
2. Strike the Concrete. Lightly sprinkle the concrete with water to minimize dust.
3. Pry Off Stubborn Pieces.
4. Move the Concrete Chunks With a Hand Truck.

How do you break thick concrete?

Start to break the concrete, starting six inches from the edge and working your way in. For slabs less than four inches thick, use a sledgehammer. For more than four inches thick, use a demolition hammer.

What is the easiest way to break a concrete floor?

Break larger pieces using a sledgehammer or electric jackhammer.

1. Use a pry bar as you go for the quickest and most effective results.
2. Do not use a jackhammer or similar power tool if you are near a water pipe, electrical line, or gas line.

Can you use a hammer drill to break up concrete?

Hammer drills do not have a chiseling function and can be used to drill into a variety of materials. Rotary hammers use an electro-pneumatic hammer piston to generate high impact energy, which allows it to drill or demolish concrete.

How do you break up 4 inch concrete?

Steps for Removing a Concrete Slab

1. Step 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you’re working on.
2. Step 2: It’s Hammer Time.
3. Step 3: Pull Apart and Remove the Broken Concrete.
4. Step 4: Repeat Steps Until Concrete Is Demolished.

What is the best tool for breaking up concrete?

Tool #1: Sledgehammer + Pry Bar When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.

How much does it cost to break concrete?

The national average cost range is $500 – $5,000, with most homeowners paying around $1,856 to remove 600 square feet of concrete sidewalk. Cost to Remove Concrete.

Concrete Removal Costs
National average cost	$1,856
Average range	$500 – $5,000
Minimum cost	$299
Maximum cost	$10,608

What size sledgehammer breaks concrete?

Standard sledgehammers measure between 7 and 15 pounds. Typical projects for a standard- size sledgehammer include removing walls, breaking concrete, and other DIY demolition and renovation tasks. Heavy-duty sledgehammers have heads that weigh 16 pounds or more.

How do you break up concrete in a pipe?

First cut the pipe flush with the floor (to give you room to work) and stuff a rag into the pipe. Then drill a series of holes straight down, about 2″- 3″ deep, all the way around the pipe about 1/2″ apart from each other and 1/2″- 3/4″ away from the pipe. Then drill diagonally from hole to hole all the way around.

How do you destroy concrete?

According to these methods, concrete structures or the like are destroyed by boring a hole in the structure, sealing quicklime and water in the hole to induce a hydration reaction which gives rise to an approximate two-fold increase in volume, and utilizing this volumetric expansion force to fragment or destroy the

What to do if concrete breaks up?

How to Dispose of Concrete

1. Rent a Roll Off Dumpster. This is a quick and affordable way to dispose of concrete, asphalt and other heavy construction debris, such as bricks.
2. Leave a ‘Free’ Sign Out.
3. Dump It Yourself.
4. Take It to a Concrete or Landscape Supplier.
5. Use It in Your Own Landscaping.
6. Create a Retaining Wall or Privacy Fence.

What is a jackhammer?

1: a pneumatically operated percussive rock-drilling tool usually held in the hands. 2: a device in which a tool (such as a chisel for breaking up pavements) is driven percussively by compressed air.

Will sugar water dissolve concrete?

Dry sugar has no effect on hardened concrete, but sugar solutions can be very corrosive.” The concrete typically begins to soften in 20 to 30 minutes, at which point you should rinse it off with water.

Do I need a hammer drill to drill concrete?

Drilling into concrete is difficult because concrete is dense, hard, and has embedded aggregate stones that can be obstacles to the drill bit. Drilling can quickly dull drill bits. When the bit encounters aggregate, the bit drags even more. The preferred tool for drilling into concrete is a hammer drill.