Quick Answer: How Much Does Stamped Concrete Patio Cost?

How much does a 20×20 stamped concrete patio cost?

The average cost for a stamped concrete is $5 to $12 per square foot, not including the concrete slab which costs $2 – $7 per square foot. Most homeowners spend a total of between $3,751 – $8,540 for stamped concrete patio. Get free estimates from concrete pros near you.

How much does a 12×12 stamped concrete patio cost?

Stamped Concrete Patio Cost Patios cost anywhere from $8 to $28 per square foot when made using stamped concrete. A 12-foot by 12-foot patio costs $1,160 to $4,040, while larger 16-foot by 20-foot patios are $2,560 to $8,960.

Which is cheaper pavers or stamped concrete?

In general, most sources suggest that the upfront cost of stamped pavement tends to be a more inexpensive option in relation to pavers. Long-term cost efficiency between the two however is relative to factors including proper installation, climate and periodic maintenance.

You might be interested:  Quick Answer: What Kind Of Concrete Do You Use For Countertops?

How much does it cost to pour a 20×20 concrete slab?

Concrete Slab Cost Calculator

Size (in feet) Approximate Cost
12×20 $1,440
20×20 $2,400
24×24 $3,460
20×30 $3,600

Does a stamped concrete patio increase home value?

Installing a patio is another project that expands and enhances your outside living area while increasing the value of your home. According to the NAR and NALP, an 18′ x 20′ concrete paver patio costs about $7,200 and you’ll earn around 69 percent.

Can I do stamped concrete yourself?

Stamped Concrete DIY. The short answer is NO! Concrete, especially stamped concrete, is unforgiving and expensive in terms of materials and time. Unlike carpentry, plumbing, or electrical work, concrete doesn’t come apart and you can ‘t come back tomorrow to finish if you run out of time or patience.

How long will stamped concrete last?

Provided it’s installed correctly and adequately maintained, stamped concrete will last just as long as non-stamped, or standard, concrete— about 25 years. That’s because the processes of installing stamped concrete and standard concrete are mostly the same.

How much does a 20×20 paver patio cost?

A 20×20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.

How much does a 10×20 concrete patio cost?

Cost of concrete per square foot

Slab Size Square Feet Average Cost
10×20 200 $1,200
12×12 144 $864
15×15 225 $1,350
16×20 320 $1,920
You might be interested:  How To Anchor A Metal Swing Set Without Concrete?

Why is stamped concrete so expensive?

You begin by having the client or designer pick out three things; the stamp design, the color of the concrete, and the color of the release which gives the highlights. It can also be cost prohibitive for the contractor to purchase a set of stamps as they can run upwards of $4,000 for a complete set.

Should I Do stamped concrete or pavers?

Pavers cost about the same as stamped concrete in most instances. Since they usually do not require replacement, pavers offer better cost efficiency over time. Repairs are quick and seamless, requiring easy replacements of cracked or broken pavers.

What is the cheapest way to do a patio?

Concrete is one of the cheapest and most popular materials that can be used to build a hard-surface patio. The aggregates of concrete can be stone, gravel, sand, or shells, which are mixed with water to form a paste that dries into a hard surface when left to settle.

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

You might be interested:  Readers ask: How Much Does A Concrete Retaining Wall Cost?

What is the difference between a concrete slab and a cement slab?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.

Leave a Reply

Your email address will not be published. Required fields are marked *