Quick Answer: Diy Polish Concrete Floor?

Can I polish my concrete floor yourself?

The good news is, you can achieve this smooth, glossy look for yourself AND you don’t have to outsource the job to tradesmen either! With a range of easy-to-operate concrete polishing equipment for rent, you can be the master of your own project on either old or new concrete floors.

How much does it cost to polish concrete floors?

Polished Concrete Cost. Economical: You can expect to pay between $3 and $12 per square foot for polished concrete, depending on your location and the complexity of the project.

How do you polish a concrete floor?

Technically a true polished concrete floor is finished using a diamond grinding machine that evens out the surface. The floor is then treated with a chemical densifier to reveal a blemish-free shine. It is not considered polished concrete until a level of 400 grits is reached to achieve a glossy finish.

How do you make a concrete floor smooth and shiny?

To achieve a smooth and shiny concrete finish first requires proper leveling, floating, and troweling before it cures. After attaining a relatively smooth concrete surface, and once the concrete is dry, you can utilize either mechanical or chemical polishing methods to achieve a nice, glossy shine.

You might be interested:  Question: How Long Does Quikrete Concrete Take To Dry?

What is the best finish for concrete floors?

Top Concrete Finishing Options

  • Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
  • Water-Based Stain.
  • Fast Stain.
  • Acrylic Sealer.
  • Standard Epoxy.
  • Metallic Epoxy.
  • Terrazzo or Granite Epoxy.
  • Quartz Sand Epoxy.

Is polished concrete slippery?

Is polished concrete slippery? Generally speaking, it is no more slippery than other hard flooring surfaces. Add water to it though and like any other hard surface it will be slippery. As a general rule Mechanically Polished Concrete is slip resistant – but like many other flooring options it will be slippery when wet.

How long does it take to polish a concrete floor?

Depending on the area, the level of polish, and the obstacles, the polishing can take upwards of 2 to 3 days. However, you can use the surface immediately after the polishing is done.

Is polished concrete cheaper than hardwood?

It is possible for a “fancy” concrete floor to be more expensive than an economical hardwood floor. In general, a tight budget will find concrete floors more budget-friendly, but it depends on the design and finish of the concrete floor.

Can you use regular sandpaper to polish concrete?

You can basically sand any type of concrete surfaces, regardless of whether it is a countertop, a floor, a wall, or a decorative object. However, be aware that you will need the right tools for the job: you can sand small and comparatively smooth surfaces by hand with regular or diamond sandpaper.

Is polished concrete cheaper than tiles?

This is because of the complicated steps involved to create the smooth and consistent finish you are after. Compare that to polished concrete look floor tiles, which cost a fraction of the price at TFO. Even including the cost of installation, it would be much cheaper to use concrete look tiles.

You might be interested:  Readers ask: How Many Bags Of Concrete Do I Need Calculator?

How do I keep my concrete floor shiny?

Stained concrete floors are easy to clean and keep shiny.

  1. Sweep your floor. Use a dustmop to avoid damaging the surface of your stained concrete floor.
  2. Mop your floors. Use a damp mop for occasional cleanup.
  3. Seal your floors.
  4. Wax your floors.
  5. Avoid scuffing your floor.
  6. Maintain your shiny floors.

How can I make my concrete floor glossy?

There are a number of ways to do this, but using a glossy sealer can give your floor an attractive, polished appearance.

  1. Clean the floor.
  2. Select a sealer.
  3. Mix the sealer thoroughly; an electric paint mixer is the best strategy, but you can mix by hand, as well.
  4. Pour some sealer into a paint tray.

What is the smoothest concrete mix?

I suggest using an aggregate free Portland cement and sand (or silica powder if its available). The ratio is typically 1 part cement to 3 parts sand and water of course. The trick to getting a smooth final surface starts after its poured and before it sets.

Leave a Reply

Your email address will not be published. Required fields are marked *