Contents

- 1 How many yards of concrete do I need for a 10×10 slab?
- 2 How do you figure a yard of concrete?
- 3 How many 80 pound bags of concrete is in a yard?
- 4 How many 80lb bags of concrete do I need for 3 yards?
- 5 Do you need rebar for 4 inch slab?
- 6 How many bags of concrete makes a yard?
- 7 How many bags of concrete do I need for a 10×20 slab?
- 8 How much does it cost for a 12×12 concrete slab?
- 9 How much is 4 yards of concrete cost?
- 10 How many bags of cement do I need for 1 cubic yard?
- 11 How many wheelbarrows is a yard of concrete?
- 12 How many bags of concrete do I need for a post hole?
- 13 Is it cheaper to mix your own concrete?
- 14 How much area does a 50 lb bag of quikrete cover?
- 15 How thick should a concrete driveway be?

## How many yards of concrete do I need for a 10×10 slab?

10 x 10 = 100 square feet. 4 ÷ 12 =.33. 100 x.33 = 33 cubic feet. 33 x. 037 = 1.22 cubic yards.

## How do you figure a yard of concrete?

How do I calculate how much concrete I need for a slab?

- Measure the area in feet.
- Multiply length by width, and then by thickness.
- Divide the resulting number by 27 to find cubic yards.

## How many 80 pound bags of concrete is in a yard?

how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.

## How many 80lb bags of concrete do I need for 3 yards?

An 80# bag of pre-mixed cement, sand and gravel ( CONCRETE ) is 0.6 cubic foot per the bag. There are 27 cubic feet in a cubic yard. So 27 / 0.6 = 45 80# bags.

## Do you need rebar for 4 inch slab?

No, you do not need rebar for a 4 – inch slab of concrete on grade. A 4 – inch -thick slab cast on the ground and in permanent contact with it will float and rebar is not required. Rebar is recommended on concrete measuring 5 – 6 inches thick.

## How many bags of concrete makes a yard?

On average, it will take 90 40lb bags, 60 60lb bags, or 45 80lb bags to fill one cubic yard of concrete.

## How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

## How much does it cost for a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

## How much is 4 yards of concrete cost?

Cost. Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost. There could be other fees for such things as Saturday concrete truck delivery and small loads.

## How many bags of cement do I need for 1 cubic yard?

Pure cement, sand and crushed rock all have about the same density, so a block of pure cement measuring 1 cubic yard of volume (about 3,600 pounds) will contain 45 bags of cement.

## How many wheelbarrows is a yard of concrete?

Wheelbarrow Conversions Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take 9 to 14 full loads to equal 1 cubic yard. The chart below shows how many full wheelbarrow loads it takes to equal the specified number of cubic yards.

## How many bags of concrete do I need for a post hole?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

## Is it cheaper to mix your own concrete?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

## How much area does a 50 lb bag of quikrete cover?

One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about. 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60- pound bags of concrete, divide 33.333 cubic feet by. 45 cubic feet to get 74.07 total bags of concrete.

## How thick should a concrete driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.