Question: How To Replace Toilet Flange In Concrete Floor?

Should toilet flange be flush with floor?

The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too. The spacing of the toilet exit “horn” and sealing surface is designed for this height.

What happens if toilet flange is broken?

A toilet flange has a metal or plastic ring that holds the toilet to the floor, and when the ring breaks, it can render the toilet unusable. If the toilet rocks because the flange is no longer holding it securely, the wax ring seal can break, water can begin to seep out and problems quickly multiply.

How much does a plumber charge to change a flange?

On the other hand, hiring a plumber to replace the flange will ensure that the job is done right by a licensed, experienced professional. The cost for a plumber to replace the toilet flange varies by region and service provider, but the average price range is approximately $130 to $310.

You might be interested:  Quick Answer: How Much Do Concrete Canvas Shelters Cost?

Is the toilet flange glued to the pipe?

This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. If it isn’t, then you will have to cut away the old flange. If the plastic pipe has a 3-inch inside diameter, you’ll have to remove the old flange from the outside of the pipe.

Do I have to glue my toilet flange?

I also caulk the area around the flange heavily so that when it leaks, the water won’t soak into the wood as easily. It’ll usually run out from under the toilet thus alerting me that there is a leak. It needs to be glued in. It’ll help prevent future rotted floors when the toilet eventually leaks again.

When should I replace toilet flange?

Do you have to replace the flange when you get a new toilet or can you just replace the wax ring? No, simply replace wax ring or seal (rubber gasket seals are becoming more popular). However if you notice damage to the floor, or flange, you may want to replace them depending on the severity of damage.

Can you replace toilet bolts without removing toilet?

In order to replace toilet bolts without removing toilet, you will have to unscrew the toilet bolts with an anticlockwise movement while holding the nut with the other hand.

Where should a toilet flange sit on a finished floor?

With the toilet removed, you can see the toilet flange and measure its height above the floor. Optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.

You might be interested:  Often asked: How To Install Stamped Concrete?

Can plunging a toilet damage the wax ring?

In an effort to dislodge whatever is clogging the toilet, many homeowners get overzealous and thrust too hard downward into the toilet with their plunger. A hard thrust downward can break the wax seal between the toilet and the floor, causing a leak. And a really hard thrust could even crack the bowl.

Leave a Reply

Your email address will not be published. Required fields are marked *