Question: How To Paint Interior Concrete Walls?

Can you paint concrete with interior paint?

Latex paint and epoxy enamel paint are the two most common choices when selecting paint to use on concrete. Latex acrylic paint for concrete floors would be the best choice for indoor concrete but not for any high traffic areas.

What kind of paint do you use on concrete walls?

Masonry paint (also called elastomeric paint or elastomeric wall coating) is a good choice for concrete painting because it contains binders that contract and expand with the concrete. Exterior house paint can crack and peel on concrete.

Is it OK to paint concrete basement walls?

Painting your basement walls can do more than just improve the look of your home; it can protect your foundation from water damage and moisture. For concrete walls, use a waterproof sealant to seal the porous material, and opt for a waterproof masonry paint to finish the job.

Do you need to prime concrete before painting?

Generally speaking, priming is so essential to successful painting outcomes, concrete will always needs a primer. However, the existing surface needs to be primed before painting if: It is unpainted. It is peeling.

What is best concrete paint?

The 7 top concrete paints for any project

• Best overall: Rust-Oleum Decorative Concrete Coating.
• Best for your budget: Kilz Decorative Concrete Coating.
• Most weather resistant: In The Swim Patio And Deck.
• Best for your driveway: Rust-Oleum EpoxyShield Professional Floor Coating Kit.
• Best for your porch: INSL-X Sure Step.

How do you get paint to stick to concrete?

Use a trisodium phosphate solution or strong detergent to scrub the floor. Sanding with coarse emery paper may be required to give the old surface a rough texture for good paint bonding. Test a small area to make sure the new paint will adhere.

How do you paint over a concrete wall?

Allow the concrete surface to dry. Existing paint needs to be scraped and sanded. Scrape any areas with loose or flaking paint, and lightly sand using fine (120 grit) sandpaper. Lightly sand intact areas of paint as well to give them the grit needed to receive new paint.

Can I paint concrete with acrylic paint?

Acrylic latex paint is a water-based product that mixes and spreads easily on masonry surfaces. You can use it to paint floors, walls, steps, or any other concrete or block surface. It doesn’t take any special tools, brushes, or rollers; it’s a very straightforward DIY product.

What is the best waterproofing paint for concrete?

KILZ® Basement & Masonry Waterproofing Paint is a premium, interior / exterior waterproofing paint designed for porous concrete and masonry surfaces.

How can I cover my basement walls cheaply?

Another unexpected and low-cost alternative wall material is an engineered lumber such as oriented strand board. OSB, which is typically used for subfloors or sheathing in construction — making it an unconventional choice for walls — is acreative, less expensive way to cover your concrete walls and divide living zones.

What is the best color for basement walls?

17 basement color ideas you should consider for your next paint project

1. Brilliant white. Brilliant white diffuses light better than any color to make your space look brighter and appear larger.
2. Red. Fiery red can infuse energy into an otherwise dull space.
3. Gray.
4. Black.
5. Navy blue.
6. Yellow.
7. Sky blue.
8. Purple.

Does Flex Seal work on basement walls?

Flex Shot and Flex Seal Liquid are great options for attacking a basement wall leak. Pour the Flex Seal Liquid into any larger cracks, then you can use a roller or brush to cover larger areas. Be sure to apply several coats and cover the area as much as you can. For best results, allow 24 hours for each coat to dry.

How do you prepare concrete for painting?

Preparation

1. Scrape old paint from the surface of the floor with a wire brush.
2. Clean the concrete with a solution of a degreaser, such as trisodium phosphate (TSP), and water.
3. Pour a solution of eight parts water and one part muriatic acid over the surface of the floor to etch the concrete for better paint adhesion.

How do you paint over old concrete?

How to Paint Concrete

1. STEP 1: Patch gouged or otherwise damaged areas with concrete filler.
2. STEP 2: Clean the concrete surface with TSP.
3. STEP 3: Let the surface dry thoroughly before you begin to paint the concrete.
4. STEP 4: Brush paint onto the perimeter of the concrete.
5. STEP 5: Roll on more paint to cover the interior.