Question: How To Clean Concrete Floors Indoors?

How do you clean interior concrete floors?

How to Clean Concrete Floors

1. Clear debris. Clean and clear the floor of all debris, dirt and dust using a vacuum, soft bristle broom or dry dust mop.
2. Apply Simple Green Multi-Surface Floor Care. Spray the cleaning solution as a light mist across your floor section by section.
3. Mop up in sections. Wet mop with clean water and wring well.
4. Dry.

How do you clean unsealed concrete floors?

How to Clean Unsealed Concrete Floors

1. Sprinkle sawdust on grease and oil stains.
2. Sweep the floor with a push broom.
3. Dust mop or vacuum the floor.
4. Apply detergent and water on the stains.
5. Scrub the stained spots with a brush.
6. Mop with a baking soda solution.
7. Rinse and wipe the floor dry.

What is the best way to clean a concrete basement floor?

Use Dish Soap and Warm Water Start by sweeping your basement floor and then sprinkle the soap on it. Pour warm water on the surface and scrub it with a soft-bristled brush. Use a mop and clean water to rinse the floor. Wring the mop as you rinse until there are no traces of the soap or stains on the floor.

Can you use vinegar to clean concrete floors?

A natural, all-purpose cleaner, white vinegar is one of the best ways to clean concrete, especially if your floor has stubborn stains caused by mildew or grease. Vinegar also works as a phenomenal spot treatment and stain remover.

What is the best cleaner for concrete floors?

Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners. Mix a solution, apply to floor with a wet mop and then rinse with a mop dipped in clean water. To make your concrete floors resistant to future stains, apply a concrete sealant.

Does white vinegar clean concrete?

Yes. Vinegar makes a great cleaner for stained concrete floors. Because of its acidity, you should dilute it 50/50 with warm water to avoid damaging the floors. However, you can use small amounts of full-strength vinegar for touch stains, followed by a quick water rinse.

Does OxiClean clean concrete?

The active ingredient in OxiClean is sodium percarbonate, a powder that, when mixed with water, releases hydrogen peroxide and soda ash. The powder mixes best into warm-to-hot water. Mop that onto the walkway and wait five to 30 minutes. During that time, you can scrub the concrete to make the cleaning more effective.

Can you use Pine Sol on concrete floors?

You can use Pine – Sol ® Cleaners on most concrete floors. Pine – Sol ® Cleaners are concentrated formulas that you dilute for most jobs. For general concrete cleanup, use a 24 oz. bottle of Pine – Sol ® for 12 gallons of cleaning power.

Does bleach harm concrete?

When applied to concrete, bleach does not harm the sturdy material. However, it does remove spots and unwanted matter from the surface, such as mildew and moss. When using bleach, work in a well-ventilated area because the fumes from bleach can be overwhelming.

What does vinegar do to concrete?

Vinegar does not dissolve concrete itself but can degrade the cement that binds concrete together. As a weak, dilute acid, vinegar will cause only minor damage to concrete but can take the shine off polished surfaces. It can, however, be used to remove small amounts of cement from tools.

What can I use to clean concrete?

Five Concrete Cleaning Products To Use

1. Soda. Soda can be used to remove grease stains.
2. Detergent. This is recommended for smaller grease spills.
3. Vinegar and Baking Soda. Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner.
4. Concrete Cleaner or Degreaser.
5. Bleach.

Will baking soda damage concrete?

When washing concrete, be wary of using any strong chemicals, particularly any acid-based cleaners—these can damage concrete. Instead, use gentle washing agents such as baking soda, dish soap, and water.

Is Simple Green good for cleaning concrete?

You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean a concrete patio with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safe for lawns and pets.

How can I make my concrete floor shine?

Regular sweeping and weekly cleaning with a mop and mild solution of dish soap and water should help concrete keep its shine. Every few months, use a pressure washer to clean dirt and debris from crevices.

How can I clean my patio without a pressure washer?

Mix a cleaning solution of half vinegar and half water, pour it onto the patio and let it sit for 20 minutes. Marshalls explain on their website: “Your water/vinegar mix should be in equal parts or, if your paving is particularly dirty, mixed with more vinegar than water.