Contents
- 1 Can you put 4×4 in concrete?
- 2 How do you anchor into existing concrete?
- 3 How do you attach treated lumber to concrete?
- 4 How many bags of concrete do I need for a 4×4 post?
- 5 How long will a treated 4×4 last in concrete?
- 6 What is the strongest concrete anchor?
- 7 How do you attach metal to concrete without drilling?
- 8 How do you attach wood to concrete without drilling?
- 9 Can you put wood directly on concrete?
- 10 What can I use to glue wood to concrete?
- 11 Should I use concrete for fence posts?
- 12 How long do fence posts last in concrete?
Can you put 4×4 in concrete?
No, it’s impossible. No matter how strong a mix or how much steel you put in it, it will crack somewhere. It has to. So let’s apply this to your pour, unsuspecting post, pole, 4×4, or 6×6 that you are using.
How do you anchor into existing concrete?
Simply drill a hole into the concrete, hold the fixture you’re fastening over the hole, then use a hammer to tap the anchor into the hole. As you drive in the pin, the sleeve expands outward, trapping the anchor in the hole.
How do you attach treated lumber to concrete?
Drill right through the wood and into the concrete with a masonry bit and hammer drill. Use a depth stop to get the correct depth and then blow the dust out of the hole with a turkey baster (don’t use your breath, because the dust will blow back in your face).
How many bags of concrete do I need for a 4×4 post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
How long will a treated 4×4 last in concrete?
A pressure treated 4×4 set in concrete should last about 20 years of more, depending on the soil conditions and drainage.
What is the strongest concrete anchor?
Wedge Anchors are extremely popular and are one of the strongest anchors for hold strength. Wedge anchors look and function like a sleeve anchor but have a much smaller sleeve near the bottom of the anchor.
How do you attach metal to concrete without drilling?
Concrete anchor bolts work best to attach metal to concrete. Steel can be attached to concrete without screws or glue by using concrete anchors and bolts.
How do you attach wood to concrete without drilling?
If you are willing to make holes in the concrete but do not want to buy the particular drill bit needed, then the simplest solution is to get nails for your project. Standard nails will not work on concrete, but some nails are made specifically for nailing wood to concrete. Cut nails will also work for this as well.
Can you put wood directly on concrete?
Wood in direct contact with concrete, and the dampness often found there, will rapidly decay. To avoid this, use pressure-treated lumber. This is wood impregnated with decay-resisting chemicals, usually chromated copper arsenates. However, pressure treating creates only a shell of protection around the wood.
What can I use to glue wood to concrete?
Quikrete 10 oz. Construction Adhesive is typically used for repairing broken concrete, bonding wall blocks to caps, and attaching wood to concrete and masonry surfaces. Quikrete 10 oz. Construction Adhesive is easy to use, needing only a caulk gun for application.
Should I use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
How long do fence posts last in concrete?
Another thing to note, damaged fence posts can bring health and safety risks to your outdoor space – a rotting fence won’t stand for long in strong winds, so consider this when deciding on your new fence. Concrete is a durable building material and can last for around 20 years with minimal maintenance.