Question: How Many Bags Of Concrete Per Sonotube?

How much concrete do I need for a sonotube?

For example, a sono tube with a 10″ diameter and a 4′ depth requires 0.08 cubic yards of concrete.

How many bags of concrete do I need for a post hole?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How many piers are in a bag of concrete?

One 60 -lb bag of concrete gives you. 45 cubic feet of concrete when mixed with 2.5 quarts of water. In order to have enough concrete for one cubic foot, you’ll require 2.2 bags of 60 -lb concrete.

How deep should Sonotubes be?

Brace securely at top, middle and bottom of tube. There is no pour rate restriction below the joint, but you CANNOT pour a full liquid head up to 20 feet when using a “Joined” Finish Free Tube if the joint is below the 20 foot level.

You might be interested:  Readers ask: How To Build A Concrete Bridge?

Do you leave sonotube in ground?

No, it’s not a problem to leave the Sonotube and its plastic “Square Foot” (like these) in the ground forever.

How many yards are in a 60 pound bag of concrete?

60 pound bag yields.017 cubic yards.

Is 2 feet deep enough for fence posts?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/ 2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet ).

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

How much does a 80lb bag of concrete cover?

bag provides 0.45 cubic feet of cured concrete. A 80 lb. bag provides 0.6 cubic feet of cured concrete. If you have concrete delivered it is sold by the yard (which is a cubic yard = 27 cubic feet).

How many bags of concrete do I need for a 6×6 post?

As I recall, a 60 # bag of concrete is about. 5cf, so you’d need 3 bags per hole.

How much do concrete piers cost?

Concrete Footing Cost Prices run $3 to $7 per square foot, depending on the project size and foundation type. An average house with dimensions measuring 150 linear feet ranges from $225 to $3,600. Pier footers can be $75 to $150 per square foot, especially if you only need a few.

You might be interested:  Often asked: How To Mix Concrete From Scratch?

How many yards are in a 50 pound bag of concrete?

If you’re using 50lb bags of concrete, you’ll need 72 bags to make a yard. If you’re using 60lb bags of concrete, you’ll need 60 bags to make a yard. If you’re using 80lb bags of concrete, you’ll need 45 bags to make a yard.

How many posts do I need for a 12×16 deck?

A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts.

Should deck posts be set in concrete?

There are several ways to set deck posts; we recommend attaching the posts to concrete footers above the ground. This helps to prevent wooden posts from rotting. Set footers a minimum of 6” below the frost line for your area to prevent movement during freezing temperatures.

Leave a Reply

Your email address will not be published. Required fields are marked *