- 1 Can you put 4×4 in concrete?
- 2 Why deck posts should not be set in concrete?
- 3 How do you attach something to concrete without drilling?
- 4 How many bags of concrete do I need for a 4×4 post?
- 5 How long will a treated 4×4 last in concrete?
- 6 How long will a pressure treated 4×4 post last in the ground?
- 7 Can pressure treated posts be set in concrete?
- 8 Is it OK to set deck posts in concrete?
- 9 Should you use 4×4 or 6×6 deck posts?
- 10 Can you pour concrete around existing deck posts?
Can you put 4×4 in concrete?
No, it’s impossible. No matter how strong a mix or how much steel you put in it, it will crack somewhere. It has to. So let’s apply this to your pour, unsuspecting post, pole, 4×4, or 6×6 that you are using.
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.
How do you attach something to concrete without drilling?
A simple fix might include an adhesive or adhesive-baked hook, while there are other fasteners like hard wall hooks and masonry nails. Powder-actuated fasteners and concrete nail guns are useful for supporting frames and providing a much greater hold.
How many bags of concrete do I need for a 4×4 post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
How long will a treated 4×4 last in concrete?
A pressure treated 4×4 set in concrete should last about 20 years of more, depending on the soil conditions and drainage.
How long will a pressure treated 4×4 post last in the ground?
The treated post that are rated for ground contact are guaranteed for 40 years.
Can pressure treated posts be set in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure – treated posts, the rot will be slow. Concrete should be poured around the post – no concrete under the post.
Is it OK to set deck posts in concrete?
There are several ways to set deck posts; we recommend attaching the posts to concrete footers above the ground. This helps to prevent wooden posts from rotting. Set footers a minimum of 6” below the frost line for your area to prevent movement during freezing temperatures.
Should you use 4×4 or 6×6 deck posts?
4×4 post will be fine. I have built many decks for new homes with them. 6×6 is more sturdy of course and will not twist as easy, but for structure purposes, 4×4 will be fine. I would just not go more then 10′ apart with them.
Can you pour concrete around existing deck posts?
1 Answer. Support either side of each post, cut it off, insert a steel stub base or pour a new concrete base to a height slightly above the planned slab, pour the new slab. Or skip pouring a slab and just put in a base for pavers and build the patio from pavers.