Often asked: How Much Does A New Concrete Driveway Cost?

Does a new concrete driveway increase home value?

You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.

How much should a new driveway cost?

New Driveway Cost For most types, you can expect to pay $2 to $15 per square foot for materials and installation. Driveway prices depend mostly on the material, which ranges from $1 to $50 per square foot, and the dimensions of the area. Concrete averages $3,000, compared to $4,600 for asphalt.

How do you estimate a concrete driveway?

To find the amount of concrete needed for a driveway, you simply find the volume of the space to fill, in yards. Start by finding the area of the driveway in square feet. Multiply the length by the width in feet to find the square footage. Next, multiply the area in feet by the depth in feet.

You might be interested:  Readers ask: How Much Does A Concrete Mixer Truck Cost?

Which is cheaper concrete or asphalt driveway?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.

How long should concrete driveway last?

A concrete driveway should last a minimum of 20 years, but a full replacement is necessary when cracks and pits are interconnected. If your foundation is lifting or there are numerous potholes across the surface of the concrete leading to drainage issues, it’s time to replace the driveway.

Should I seal my concrete driveway?

And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. Many people believe that concrete driveways don’t need maintenance, so they may never apply a sealer. This is a good time of year for driveway work.

How can I widen my driveway cheaply?

Alternatives to Concrete and Asphalt Installing stabilized gravel with permeable pavers, however, is the single cheapest and most effective solution to extending a driveway while providing long-term durability and functionality. TRUEGRID offers every type of paver you need to match your driveway situation.

What is the cheapest type of driveway?

Pound for pound, aggregate is the cheapest of these four common driveway materials. A basic gravel driveway can cost as little as $0.50 per square foot – an order of magnitude less than a professionally installed asphalt, stone, or concrete driveway. Durability. Aggregate is extremely durable.

You might be interested:  Readers ask: How Much Is Crushed Concrete?

What’s the cheapest driveway material?

Generally, gravel is the cheapest material, with resin and concrete being the most expensive.

Do you need gravel under concrete driveway?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

How thick should a concrete driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Can a concrete driveway be resurfaced?

RE-CAP Concrete Resurfacer will renew your old, worn concrete driveways, sidewalks and patios at a fraction of the cost to tear out and replace old concrete slabs.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

Can I Asphalt my own driveway?

Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.

You might be interested:  Question: How To Drill A Hole In Concrete?

What driveway surface is best?

Best surfaces for driveways

  • Resin -bonded gravel. For more complicated driveways, those that have a steep incline, or for anyone looking for a low-maintenance option, probably the best option (albeit the most expensive one) is resin -bonded gravel.
  • Nidagravel 140.
  • Tarmac planings.

Leave a Reply

Your email address will not be published. Required fields are marked *