Often asked: How Much Does 5 Yards Of Concrete Cost?

How much does it cost for 5 yards of concrete?

Each cubic yard of concrete costs $119 to $147 per cubic yard delivered. Short-Load Concrete Prices.

Cubic Yards Mixing On-site Fees
5 – 5.75 $70
4 – 4.75 $80
3 – 3.75 $90
2 – 2.75 $100

How many square feet will 5 yards of concrete cover?

According to the table above, one cubic yard of concrete placed at a thickness of 5-inches covers 65 square feet. In a perfect universe, our 1,080 square foot driveway will need exactly 16.62 cubic yards of concrete (1,080 square feet / 65 square feet equals 16.62 cubic yards).

How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

You might be interested:  Readers ask: How To Build A Fire Pit With Concrete Blocks?

How many yards of concrete do I need for a 10×10 slab?

10 x 10 = 100 square feet. 4 ÷ 12 =.33. 100 x.33 = 33 cubic feet. 33 x.037 = 1.22 cubic yards.

Can I pour a 2 inch concrete slab?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

How many bags of cement do I need for 100 square feet?

4 bags ( 401 kg) of cement and 1593 nos bricks are required for 100 square feet 13.5 inch brick wall.

How many 80lb bags of concrete make a yard?

how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.

How much does 2 yards of concrete cost?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2018 was $120 per cubic yard, or $240 for the 2 cubic yards needed for a typical 10-by-10-foot patio. Bulk Concrete Prices.

Cubic Yards Price Range
1* $140-$200
2 * $280-$400
3* $420-$600
4* $560-$800

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

You might be interested:  Often asked: 3000 Psi Concrete?

Is it cheaper to buy premixed concrete?

It’s cheaper to do all the prep and buy the concrete premixed and delivered. For example, a 10×20′ slab of 4″ concrete would be a minimum of 2.5-3 yards. Here concrete is about $80/yard (closer to $70), or $240 for the concrete. That same slab would take 223 40-pound bags, or 112 80-pound bags.

How much would a 4 inch slab of concrete cost?

It costs about $6 per square foot to pour concrete, or between $4 and $8 per square foot. Concrete Work Cost by Thickness.

Thickness Typical Cost With Labor
4” $5.35 per square foot
5” $5.80 per square foot
6” $6.20 per square foot
8” $7 per square foot

Do you need rebar for 4 inch slab?

No, you do not need rebar for a 4 – inch slab of concrete on grade. A 4 – inch -thick slab cast on the ground and in permanent contact with it will float and rebar is not required. Rebar is recommended on concrete measuring 5 – 6 inches thick.

How many bags of concrete makes a yard?

On average, it will take 90 40lb bags, 60 60lb bags, or 45 80lb bags to fill one cubic yard of concrete.

How thick should a concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

Leave a Reply

Your email address will not be published. Required fields are marked *