- 1 How thick should a concrete shower pan be?
- 2 Do you need a shower pan liner on concrete floor?
- 3 How do you install a shower tray on a concrete floor?
- 4 Can I use concrete for shower pan?
- 5 Which quikrete for shower pan?
- 6 What type of cement is used for shower pan?
- 7 Do I need a mortar bed for shower pan?
- 8 Is wire mesh necessary in shower pan?
- 9 Can you put tile directly on concrete?
- 10 What is the difference between a shower pan and a shower base?
- 11 Do you put flooring under shower?
- 12 What is the minimum fall for shower waste?
- 13 Can you use thinset for shower pan?
- 14 How deep should a shower pan be?
How thick should a concrete shower pan be?
As a general rule, a shower curb foundation is 3 to 4 inches thick and 4 to 6 inches tall, with finish material adding to these dimensions.
Do you need a shower pan liner on concrete floor?
JRC3 Member. It will need to be lined or it will wick into the slab and studding. The liner also makes the walls around the pan water-tight, that’s why the liner normally goes up at least 3″ above the pan behind the tile and backer material.
How do you install a shower tray on a concrete floor?
Fit the shower tray over the bed of adhesive and firm down ensuring the tray is level in all planes Identify the position of the drain and trap and remove any existing concrete to a depth of approx. 85mm down from the underside of the tray together with a channel to accommodate the waste pipe.
Can I use concrete for shower pan?
Concrete is perfectly adequate, if not recommended, for use as the shower pan base for materials such as stone, tile or mosaic tile to be used as the finish surface (as long as there is a proper membrane between the concrete and any vulnerable surrounding material).
Which quikrete for shower pan?
QUIKRETE® Floor Mud (No. 1548-81) is a Portland cement based underlayment mortar designed for leveling travertine, slate and marble floor tile, and for shower pan applications.
What type of cement is used for shower pan?
The ideal mortar for a shower pan is a mix of standard cement mix with sand and Portland cement. This type of mortar creates a great water -resistant barrier that can support the weight of the shower unit.
Do I need a mortar bed for shower pan?
Most installers recommend putting a bed of mortar down for the shower base to sit on. Check the manufacturer’s installation instructions and see what they recommend in case the use of mortar is discouraged.
Is wire mesh necessary in shower pan?
Before installing the final layer of mortar on the shower pan you will need to install expanded wire mesh on the shower curb, over the PVC pan liner. The wire mesh will cover the entire curb from the inside of the shower pan at the top of the mortar floor over the top of the curb and down to the bathroom floor.
Can you put tile directly on concrete?
A: It’s perfectly acceptable to put tile directly on concrete — with a couple of caveats. First, it is important to determine if there is moisture coming up from the slab. Those products should help prevent any cracks in the slab from damaging the newly installed tile.
What is the difference between a shower pan and a shower base?
While a shower pan and a shower base both channel water into the drain, there’s one key difference: “ Shower pan ” is the actual shower floor that you step on, whereas “ shower base ” refers to the structure underneath the shower itself.
Do you put flooring under shower?
A floating floor needs to float, do not put it under the shower pan. You will need to leave an expansion gap at the pan per manufacturer recommendations on whatever floor you choose. Therefore, you need not be perfect with the install, but will cover the edge with molding.
What is the minimum fall for shower waste?
Waste pipes need to be installed sloping down to ensure the water runs the right way. This needs to be a minimum of 10mm fall for every 4m of pipe which can lead to insufficient fall within the floor void under baths or showers (especially under low-level or flush shower trays).
Can you use thinset for shower pan?
Apply thinset mortar to the floor within your pencil lines. Allow the thinset to dry for 24 hours. Connect the shower base gasket attachment to the shower drain. Place the drain cover on top of the drain.
How deep should a shower pan be?
The shower pan curb must be a minimum of 2 inches above the top of the drain. This is common building code in the U.S. For example, if you have a 1/4 inch per foot slope, and the curb is 3 feet from the drain, the curb must raise 1 1/4 inch from the shower floor. Of course, this is for the finished shower.