Contents

- 1 How much does a cubic foot of concrete cost?
- 2 How many cubic feet are in a bag of concrete?
- 3 What does 5 cubic feet of concrete weigh?
- 4 How much concrete do I need for a 10×10 slab?
- 5 Can I pour a 2 inch concrete slab?
- 6 How many bags of concrete makes a yard?
- 7 Can you pour concrete directly on dirt?
- 8 How many cubic feet is a 5 gallon bucket?
- 9 How many cubic feet are in a 50 pound bag of concrete?
- 10 How much does a 5 gallon bucket of concrete weigh?
- 11 How many 80lb bags of concrete make a yard?
- 12 How much does 1 cubic foot of dirt weigh?
- 13 How many cubic feet are in a 60 pound bag of concrete?
- 14 How thick should a concrete slab be?
- 15 How many square feet does 10 yards of concrete cover?

## How much does a cubic foot of concrete cost?

The average cost of concrete is $119 to $147 per cubic yard, which includes delivery up to 20 miles. Pouring plain concrete costs $5 to $10 per square foot depending on the quality, while colored, stamped, or stained concrete costs $8 to $18 per square foot to install.

## How many cubic feet are in a bag of concrete?

bag provides 0.45 cubic feet of cured concrete. A 80 lb. bag provides 0.6 cubic feet of cured concrete. If you have concrete delivered it is sold by the yard (which is a cubic yard = 27 cubic feet ).

## What does 5 cubic feet of concrete weigh?

You know, from the information above, a cubic foot of concrete weighs 150 pounds. Multiply 150 pounds by. 5 feet and you get 75 pounds for a square foot of concrete that’s 6 inches thick. How much does a 4″ thick square foot of concrete weigh?

## How much concrete do I need for a 10×10 slab?

For a 10 x 10 slab, we’d suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

## Can I pour a 2 inch concrete slab?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

## How many bags of concrete makes a yard?

On average, it will take 90 40lb bags, 60 60lb bags, or 45 80lb bags to fill one cubic yard of concrete.

## Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

## How many cubic feet is a 5 gallon bucket?

Since a one- gallon pail is equal to 0.134 cubic feet, a standard five- gallon bucket equals exactly 0.67 cubic feet. We’ll explain how we arrived at that number, what exactly is a cubic foot, how you can calculate it yourself and some uses for the five – gallon bucket.

## How many cubic feet are in a 50 pound bag of concrete?

One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about. 375 cubic feet.

## How much does a 5 gallon bucket of concrete weigh?

In general a 5 gallon bucket of hardened Quikrete will weigh about 100 pounds. Change the mix and you could end up as high as 200 pounds or as low as 60 pounds.

## How many 80lb bags of concrete make a yard?

how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.

## How much does 1 cubic foot of dirt weigh?

A cubic foot of soil weighs between 74 and 110 pounds, depending on the type of soil and how moist it is. Dry, loose dirt weighs about 76 pounds per cubic foot, while moist, loose dirt weighs 78 pounds per cubic foot.

## How many cubic feet are in a 60 pound bag of concrete?

Each 60-pound bag of QUIKRETE® Concrete Mix will yield approximately 0.45 cubic feet of mixed concrete.

## How thick should a concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

## How many square feet does 10 yards of concrete cover?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet. 6-inches thick – covers 54 square feet.