FAQ: How Much For Concrete?

How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

How much does it cost to pour a 20×20 concrete slab?

Concrete Slab Cost Calculator

Size (in feet) Approximate Cost
12×20 $1,440
20×20 $2,400
24×24 $3,460
20×30 $3,600

How much is concrete per yard near me?

Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost.

How much does 4 yards of concrete cost?

Each cubic yard of concrete costs $119 to $147 per cubic yard delivered. Short-Load Concrete Prices.

You might be interested:  FAQ: How To Fix Cracks In Driveway Concrete?
Cubic Yards Mixing On-site Fees
4 – 4.75 $80
3 – 3.75 $90
2 – 2.75 $100
1 – 1.75 $110

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

How much does a 10×20 concrete patio cost?

Cost of concrete per square foot

Slab Size Square Feet Average Cost
10×20 200 $1,200
12×12 144 $864
15×15 225 $1,350
16×20 320 $1,920

How much does a 20×20 patio cost?

Cost to Put in a New Patio by Size

7×7 $250-$2,500
10×10 $500-$5,000
12×12 $750-$7,200
16×18 $1,450-$14,500
20×20 $2,000-$20,000

What is the difference between a concrete slab and a cement slab?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

Do you need rebar for 4 inch slab?

No, you do not need rebar for a 4 – inch slab of concrete on grade. A 4 – inch -thick slab cast on the ground and in permanent contact with it will float and rebar is not required. Rebar is recommended on concrete measuring 5 – 6 inches thick.

You might be interested:  Question: Why Do Cats Lick Concrete?

How many 80lb bags of concrete make a yard?

how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.

Why is concrete so expensive?

Concrete work can easily become expensive because there are many factors that go into it besides the cost of concrete and labor. Other things considered in the final price include the type of concrete job and project elements that could result in additional work and materials required to complete it.

Can I pour a 2 inch concrete slab?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

How many bags of concrete makes a yard?

On average, it will take 90 40lb bags, 60 60lb bags, or 45 80lb bags to fill one cubic yard of concrete.

How thick should a concrete driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Leave a Reply

Your email address will not be published. Required fields are marked *